UKVoIPTalk.com

Hi there,

Anyone using a Fritzbox on here?

Bob

"bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk
: : Hi there,
: :
: : Anyone using a Fritzbox on here?
: :
: : Bob

Yes, plenty of us. Which model and what's the question about it..?

Ivor

"bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk...[color=blue]
> Hi there,
>
> Anyone using a Fritzbox on here?
>
> Bob[/color]
yes

Ivor Jones wrote:[color=blue]
> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
> news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk : : Hi there,
> : : : : Anyone using a Fritzbox on here?
> : : : : Bob
>
> Yes, plenty of us. Which model and what's the question about it..?
>
> Ivor
>[/color]
hi, Ivor

I have the fone ata with two separate lines, I think it the 1020 model,
I updates to the latest firmware the other evening, because the volume
on the device was a little low, it seemed to improve that and allowed
extra option, but caused a problem when I called a mate who as a sipura
device and is also on Sipgate, it keeped causing his device to re-set
every time the phone rang at his end of the call, I was also wondering
out to set the device to all me to reduce allow for local calls, a
example would be instead of dialing 02082874189 I could just dial a
local number, I'm used to dial plans on the sipura device.

I notice they have forum, but no English ones!

Cheers, Bob

Herman wrote:[color=blue]
> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
> news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk...[color=green]
>> Hi there,
>>
>> Anyone using a Fritzbox on here?
>>
>> Bob[/color]
> yes
>
>[/color]
which one do you have?

Bob

"bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
news:6OUvj.79417$LD6.55108@fe3.news.blueyonder.co.uk...[color=blue]
> Ivor Jones wrote:[color=green]
>> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
>> news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk : : Hi there,
>> : : : : Anyone using a Fritzbox on here?
>> : : : : Bob
>>
>> Yes, plenty of us. Which model and what's the question about it..?
>>
>> Ivor
>>[/color]
> hi, Ivor
>
> I have the fone ata with two separate lines, I think it the 1020 model, I
> updates to the latest firmware the other evening, because the volume on
> the device was a little low, it seemed to improve that and allowed extra
> option, but caused a problem when I called a mate who as a sipura device
> and is also on Sipgate, it keeped causing his device to re-set every time
> the phone rang at his end of the call, I was also wondering out to set the
> device to all me to reduce allow for local calls, a example would be
> instead of dialing 02082874189 I could just dial a local number, I'm used
> to dial plans on the sipura device.
>
> I notice they have forum, but no English ones!
>
> Cheers, Bob[/color]

Suspect his problem is his router or other device on his network. I had a
BT Voyager once that locked up occasionally when SIP traffic passed through.
Alternatively he may need to open some ports on his router, or the Sipura
may have some settings that need adjusting (no experience of these
unfortunately)

Your volume issue may be caused by the regional settings in the Fritz. In
my 7050 I can change this in Settings > Telephony > Regional options. You
may find that this has reset as a result of your firmware upgrade.

To be honest, I found the firmware updates on my Fritz caused more problems
than they solved. For instance, 3 way calling no longer works for me.

Herman wrote:[color=blue]
> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
> news:6OUvj.79417$LD6.55108@fe3.news.blueyonder.co.uk...[color=green]
>> Ivor Jones wrote:[color=darkred]
>>> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
>>> news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk : : Hi there,
>>> : : : : Anyone using a Fritzbox on here?
>>> : : : : Bob
>>>
>>> Yes, plenty of us. Which model and what's the question about it..?
>>>
>>> Ivor
>>>[/color]
>> hi, Ivor
>>
>> I have the fone ata with two separate lines, I think it the 1020 model, I
>> updates to the latest firmware the other evening, because the volume on
>> the device was a little low, it seemed to improve that and allowed extra
>> option, but caused a problem when I called a mate who as a sipura device
>> and is also on Sipgate, it keeped causing his device to re-set every time
>> the phone rang at his end of the call, I was also wondering out to set the
>> device to all me to reduce allow for local calls, a example would be
>> instead of dialing 02082874189 I could just dial a local number, I'm used
>> to dial plans on the sipura device.
>>
>> I notice they have forum, but no English ones!
>>
>> Cheers, Bob[/color]
>
> Suspect his problem is his router or other device on his network. I had a
> BT Voyager once that locked up occasionally when SIP traffic passed through.
> Alternatively he may need to open some ports on his router, or the Sipura
> may have some settings that need adjusting (no experience of these
> unfortunately)
>
> Your volume issue may be caused by the regional settings in the Fritz. In
> my 7050 I can change this in Settings > Telephony > Regional options. You
> may find that this has reset as a result of your firmware upgrade.
>
> To be honest, I found the firmware updates on my Fritz caused more problems
> than they solved. For instance, 3 way calling no longer works for me.
>
>[/color]
cheers Ivor, I've set the regional options to the uk, although not sure
the the tones it generates are uk, the sipura as great options for
changing various tones, what did you do for the dialing option to avoid
having to dial the whole sat code on a local call/

"bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
news:pxXvj.11651$jH4.2171@fe1.news.blueyonder.co.uk...[color=blue]
> Herman wrote:[/color]
[color=blue][color=green]
>>
>> Suspect his problem is his router or other device on his network. I had
>> a BT Voyager once that locked up occasionally when SIP traffic passed
>> through. Alternatively he may need to open some ports on his router, or
>> the Sipura may have some settings that need adjusting (no experience of
>> these unfortunately)
>>
>> Your volume issue may be caused by the regional settings in the Fritz.
>> In my 7050 I can change this in Settings > Telephony > Regional options.
>> You may find that this has reset as a result of your firmware upgrade.
>>
>> To be honest, I found the firmware updates on my Fritz caused more
>> problems than they solved. For instance, 3 way calling no longer works
>> for me.[/color]
> cheers Ivor, I've set the regional options to the uk, although not sure
> the the tones it generates are uk, the sipura as great options for
> changing various tones, what did you do for the dialing option to avoid
> having to dial the whole sat code on a local call/[/color]

Think you meant Herman... anyway, the tones aren't regionalised
unfortunately on the Fritz. Doesn't bother me but could be a bit annoying,
I agree.

I have seen other comments on the Sipura. Tones etc seem to be very
configurable but a little fiddly if I remember correctly.

"Herman" <whitehouse.madhousetakemeout@bigfoot.com> wrote in message
news:fpplvl$jv0$1@aioe.org...
[color=blue]
> I have seen other comments on the Sipura. Tones etc seem to be very
> configurable but a little fiddly if I remember correctly.[/color]

As if by magic, Jono has just posted the Sipura regional settings in the
thread
"Configuring Sipura SPA3102". Must've read your mind...

Cheers,

Herman

Herman wrote:[color=blue]
> "Herman" <whitehouse.madhousetakemeout@bigfoot.com> wrote in message
> news:fpplvl$jv0$1@aioe.org...
>[color=green]
>> I have seen other comments on the Sipura. Tones etc seem to be very
>> configurable but a little fiddly if I remember correctly.[/color]
>
> As if by magic, Jono has just posted the Sipura regional settings in the
> thread
> "Configuring Sipura SPA3102". Must've read your mind...
>
> Cheers,
>
> Herman
>
>
>[/color]
cheers mate,


What about settings for local calls, that could be done on a dial plan
with the sipura, dont want to dial the full 0108 thingy for local calls etc