UKVoIPTalk.com

I am a new be to the SPA-3102 and I am looking for some help configuring the
PSTN to VOIP section. I can at the present time dial in to my PSTN line and
then enter a PIN number and get a dial tone for my VOIP account. What I am
looking to do if possible is to get the SPA-3102 to recognise the CLID of
the phone I am calling from and allow me access to my VOIP line with out any
pin number. I know that I can switch off the PIN number in the SPA-3102 but
if some one else were to call it they then would have access to my VOIP
line, which I don't want.

Thank you all in advance for your help and Merry Christmas to all.

Dan formulated on Friday :[color=blue]
> I am a new be to the SPA-3102 and I am looking for some help configuring the
> PSTN to VOIP section. I can at the present time dial in to my PSTN line and
> then enter a PIN number and get a dial tone for my VOIP account. What I am
> looking to do if possible is to get the SPA-3102 to recognise the CLID of the
> phone I am calling from and allow me access to my VOIP line with out any pin
> number. I know that I can switch off the PIN number in the SPA-3102 but if
> some one else were to call it they then would have access to my VOIP line,
> which I don't want.
>
> Thank you all in advance for your help and Merry Christmas to all.[/color]

Does any of this
<http://forum.voxilla.com/linksys-sipura-voip-support-forum/pstn-caller-id-pattern-pstn-access-list-problem-13511.html#post69521>
point you in the right direction?

Having said that, with the relative ease of being able to spoof
outbound Caller ID, I would take the belt & braces approach & still
have a PIN set.

That link worked great, got the information I needed thank you. I have
another question, is it possible to spoof a CLID from the 3102 ? if so how ?
Once again thank you in advance.

"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.ac827d7c2d540d8a.48968@blueyonder.invalid...[color=blue]
> Dan formulated on Friday :[color=green]
>> I am a new be to the SPA-3102 and I am looking for some help configuring
>> the PSTN to VOIP section. I can at the present time dial in to my PSTN
>> line and then enter a PIN number and get a dial tone for my VOIP account.
>> What I am looking to do if possible is to get the SPA-3102 to recognise
>> the CLID of the phone I am calling from and allow me access to my VOIP
>> line with out any pin number. I know that I can switch off the PIN number
>> in the SPA-3102 but if some one else were to call it they then would have
>> access to my VOIP line, which I don't want.
>>
>> Thank you all in advance for your help and Merry Christmas to all.[/color]
>
> Does any of this
> <http://forum.voxilla.com/linksys-sipura-voip-support-forum/pstn-caller-id-pattern-pstn-access-list-problem-13511.html#post69521>
> point you in the right direction?
>
> Having said that, with the relative ease of being able to spoof outbound
> Caller ID, I would take the belt & braces approach & still have a PIN set.
>
>[/color]

After serious thinking Zid Swanish wrote :[color=blue]
> I have another question, is it possible to spoof a CLID from the 3102 ? if so
> how ?[/color]

That all depends on your VoIP Service Provider.

If your SP supports it, the SPA3102 can perform it.

The Betamax companies allow limited spoofing - you can spoof a real
number that you have direct access to. Their system dials the number
and plays an authentication PIN to you which you type into the website.