UKVoIPTalk.com

John Miller (johnmiller@nospamplease.com) ha scritto:

:: all three of them work perfectly on my Annex A line here...

Of course.

John Miller (johnmiller@nospamplease.com) ha scritto:

:: There is a patch available for German Annex-B 7050's
:: to make them Annex-A (and still in German language).
:: Many people use it this way outside of Germany when
:: they buy one from eBay.

BE CAREFUL!

A different patching way is needed to patch fritz box fon 7050
which works with AVM latest german firmware (xx.xx.31).

> BE CAREFUL![color=blue]
> A different patching way is needed to patch fritz box fon 7050
> which works with AVM latest german firmware (xx.xx.31).[/color]

I thought there was no patch available yet for firmware 14.04.30 and
14.04.31 to annex A? Can you please give me a link for that?

The only way I know to get a German 14.04.30 or 14.04.31 to work with Annex
A is to downgrade it to 14.04.26, and then apply the Annex-A patch.

John Miller (johnmiller@nospamplease.com) ha scritto:

:: The only way I know to get a German 14.04.30 or 14.04.31
:: to work with Annex A is to downgrade it to 14.04.26, and
:: then apply the Annex-A patch.

Of course, you can downgrade the latest firmware to a
previous one (e.g. 14.04.31 to 14.04.26) but the way to do that
is quite difficult and dangerous because you have to move the
fritzbox bootloader between two different memory blocks.

If you make any mistakes during those steps, then you could
only get a technological-well-designed ornament for your
living room ;-)

John Miller (johnmiller@nospamplease.com) ha scritto:

:: But you didn't reply to my question: can you please tell me
:: how you did what you wrote here:

:::: A different patching way is needed to patch fritz box fon 7050
:::: which works with AVM latest german firmware (xx.xx.31).

The answer was in my previous message.

You should have to move the fritzbox bootloader between two
different memory blocks.

Don't you know how? Write me an email: [email]saintofsky@gmail.com[/email]

> If you make any mistakes during those steps, then you could[color=blue]
> only get a technological-well-designed ornament for your
> living room ;-)[/color]

Luckely after the downgrade I was still able to use it in the way it was
originaly meant :-)

But you didn't reply to my question: can you please tell me how you did what
you wrote here:
[color=blue][color=green]
>> A different patching way is needed to patch fritz box fon 7050
>> which works with AVM latest german firmware (xx.xx.31).[/color][/color]

Thanks.