UKVoIPTalk.com

On Mar 31, 2:47 pm, Jono <notha...@blueyonder.invalid> wrote:[color=blue]
> on 31/03/2007, Matt supposed :
>[color=green]
> > It lets me verify my other numbers, but not the 08704 number. Very
> > strange...[/color]
>[color=green]
> > Now getting Trixbox to use that details seems to be another challenge![/color]
>[color=green]
> > Do you set the outgoing id in the extension or the trunk? Or both?
> > Which format are you using? 00441827, 441827 or 01827?[/color]
>
> Here's my voipcheap.com trunk. As you can see that the CLID is set in
> my trunk, not in the extensions.
>
> PEER Details:
> allow=ulaw&alaw
> authuser=username
> disallow=all
> dtmfmode=rfc2833
> fromdomain=voipcheap.com
> fromuser=00448700xxxxxx
> host=sip.voipcheap.com
> insecure=very
> nat=yes
> qualify=yes
> secret=password
> type=friend
> username=username[/color]

Cheers Jono,

Will try those settings later.

Ta!

Matt

"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.fb737d7388d6820a.48968@blueyonder.invalid...[color=blue]
> I will try my German number in a bit, however, even though I have set
> everything up as 004401 or 0044870 (for the UK ones), the number that
> is presented is not in the format 00441, nor +441 but 01. Therefore, I
> suspect that the German one would be correct for dialling a German
> number......[/color]

Yes, of course the CLI is presented as 01. This is because your provider in
the UK (e.g. BT) is correcting the 00441 into 01.
If you use a german number for outgong CLI, the number will be presented as
0049xxx except in Germany, where it will be presented as 0xxx

On Mar 31, 4:08 pm, "Matt" <matthew.humphr...@gmail.com> wrote:[color=blue]
> On Mar 31, 2:47 pm, Jono <notha...@blueyonder.invalid> wrote:
>
>
>
>
>[color=green]
> > on 31/03/2007, Matt supposed :[/color]
>[color=green][color=darkred]
> > > It lets me verify my other numbers, but not the 08704 number. Very
> > > strange...[/color][/color]
>[color=green][color=darkred]
> > > Now getting Trixbox to use that details seems to be another challenge![/color][/color]
>[color=green][color=darkred]
> > > Do you set the outgoing id in the extension or the trunk? Or both?
> > > Which format are you using? 00441827, 441827 or 01827?[/color][/color]
>[color=green]
> > Here's my voipcheap.com trunk. As you can see that the CLID is set in
> > my trunk, not in the extensions.[/color]
>[color=green]
> > PEER Details:
> > allow=ulaw&alaw
> > authuser=username
> > disallow=all
> > dtmfmode=rfc2833
> > fromdomain=voipcheap.com
> > fromuser=00448700xxxxxx
> > host=sip.voipcheap.com
> > insecure=very
> > nat=yes
> > qualify=yes
> > secret=password
> > type=friend
> > username=username[/color]
>
> Cheers Jono,
>
> Will try those settings later.
>
> Ta!
>
> Matt- Hide quoted text -
>
> - Show quoted text -[/color]

That sorted it.

Just need to find a way of setting the clid on an extension be
extension basis....

Cheers Jono!

Philippe Deleye wrote :[color=blue]
> "Jono" <nothanks@blueyonder.invalid> wrote in message
> news:mn.fb737d7388d6820a.48968@blueyonder.invalid...[color=green]
>> I will try my German number in a bit, however, even though I have set
>> everything up as 004401 or 0044870 (for the UK ones), the number that
>> is presented is not in the format 00441, nor +441 but 01. Therefore, I
>> suspect that the German one would be correct for dialling a German
>> number......[/color]
>
> Yes, of course the CLI is presented as 01. This is because your provider in
> the UK (e.g. BT) is correcting the 00441 into 01.
> If you use a german number for outgong CLI, the number will be presented as
> 0049xxx except in Germany, where it will be presented as 0xxx[/color]

I am gonna have to try it now...

Philippe Deleye expressed precisely :[color=blue]
> "Jono" <nothanks@blueyonder.invalid> wrote in message
> news:mn.fb737d7388d6820a.48968@blueyonder.invalid...[color=green]
>> I will try my German number in a bit, however, even though I have set
>> everything up as 004401 or 0044870 (for the UK ones), the number that
>> is presented is not in the format 00441, nor +441 but 01. Therefore, I
>> suspect that the German one would be correct for dialling a German
>> number......[/color]
>
> Yes, of course the CLI is presented as 01. This is because your provider in
> the UK (e.g. BT) is correcting the 00441 into 01.
> If you use a german number for outgong CLI, the number will be presented as
> 0049xxx except in Germany, where it will be presented as 0xxx[/color]

Not sure I've seen you get anything wrong yet & it hasn't happened this
time either.

"Philippe Deleye" <Philippe.Deleye@blablabla.advalvas.be> wrote in message
news:460e45f2$0$13864$ba620e4c@news.skynet.be...[color=blue]
> A few more tips to get this correctly done:
> * register your landlines as descrobed above, but make sure you use the
> format 0044 xxxx, not in the format +44 xxx
> The latter will work for verification, but not for CLI..
> * set your SIP device or IP phone to use your phone number, and also use
> the
> same format (0044 xxxx) here.
> If you have dones this correctly, it will work perfectly, even for non-UK
> numbers.[/color]

Hey - that is a fantastically helpful tip which I confirm works well with
my ATA (Gate 102) and voipcheap.com - many thanks - Cheers from Mike

"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.fca57d73c905e784.48968@blueyonder.invalid...[color=blue]
> Not sure I've seen you get anything wrong yet & it hasn't happened this
> time either.
>[/color]
Is this a compliment ?? Thanks a lot ;)
Happy to know that I could help
I must admit that my english is not that good (I'm flemish speaking belgian)
but I guess I could make myself understanable ...
I'm also following german voip groups, hence I'm just transmitting
(translating) thungs I learned over there ;)

rgds
Philippe

on 31/03/2007, Philippe Deleye supposed :[color=blue]
> "Jono" <nothanks@blueyonder.invalid> wrote in message
> news:mn.fca57d73c905e784.48968@blueyonder.invalid...[color=green]
>> Not sure I've seen you get anything wrong yet & it hasn't happened this
>> time either.
>>[/color]
> Is this a compliment ?? Thanks a lot ;)
> Happy to know that I could help
> I must admit that my english is not that good (I'm flemish speaking belgian)
> but I guess I could make myself understanable ...
> I'm also following german voip groups, hence I'm just transmitting
> (translating) thungs I learned over there ;)
>
> rgds
> Philippe[/color]

Obviously rushing when typing the above..?

For a moment, I wondered what a Flemish was that spoke Belgian :-).
English - what an odd language.

It was most definitely a compliment, yes.

Thanks for your input & make sure you come back here!

On Mar 31, 7:41 pm, "Matt" <matthew.humphr...@gmail.com> wrote:[color=blue]
> On Mar 31, 4:08 pm, "Matt" <matthew.humphr...@gmail.com> wrote:
>
>
>[color=green]
> > On Mar 31, 2:47 pm, Jono <notha...@blueyonder.invalid> wrote:[/color]
>[color=green][color=darkred]
> > > on 31/03/2007, Matt supposed :[/color][/color]
>[color=green][color=darkred]
> > > > It lets me verify my other numbers, but not the 08704 number. Very
> > > > strange...[/color][/color]
>[color=green][color=darkred]
> > > > Now getting Trixbox to use that details seems to be another challenge![/color][/color]
>[color=green][color=darkred]
> > > > Do you set the outgoing id in the extension or the trunk? Or both?
> > > > Which format are you using? 00441827, 441827 or 01827?[/color][/color]
>[color=green][color=darkred]
> > > Here's my voipcheap.com trunk. As you can see that the CLID is set in
> > > my trunk, not in the extensions.[/color][/color]
>[color=green][color=darkred]
> > > PEER Details:
> > > allow=ulaw&alaw
> > > authuser=username
> > > disallow=all
> > > dtmfmode=rfc2833
> > > fromdomain=voipcheap.com
> > > fromuser=00448700xxxxxx
> > > host=sip.voipcheap.com
> > > insecure=very
> > > nat=yes
> > > qualify=yes
> > > secret=password
> > > type=friend
> > > username=username[/color][/color]
>[color=green]
> > Cheers Jono,[/color]
>[color=green]
> > Will try those settings later.[/color]
>[color=green]
> > Ta![/color]
>[color=green]
> > Matt- Hide quoted text -[/color]
>[color=green]
> > - Show quoted text -[/color]
>
> That sorted it.
>
> Just need to find a way of setting the clid on an extension be
> extension basis....
>
> Cheers Jono![/color]

In answer to my own question....

If you remove the fromuser definition in the trunk, and set the CLID
in the extension, is all seems to work and pass out the extenstion
CLID!

Hope this helps someone else.

Thanks

Matthew

Matt was thinking very hard :
[color=blue]
>
> In answer to my own question....
>
> If you remove the fromuser definition in the trunk, and set the CLID
> in the extension, is all seems to work and pass out the extenstion
> CLID!
>
> Hope this helps someone else.
>
> Thanks
>
> Matthew[/color]

Interesting.

Pity only 5 numbers can be added.....