UKVoIPTalk.com

Folks

Using a Sipura 1001 ATA - correctly configured as far as I can see to
provide me with an engaged tone.

My problem is that if i ring a number that is engaged, I get no engaged
(or any other) tone.
I have checked this out by dialling the same number wth a mobile.

I subscribe to both Sipgate and Voip.co.uk through the one ATA.

I have raied the issue with .co.uk and have had the below response.....[color=blue]
> So .... my first question to the forum is ....... do I have the
> ability to log SIP messages on my SIPURA 1001 - and if so how!?
>
> Thanks[/color]

Mick
--

From Voip.co.uk ............
[color=blue]
> I am a bit stumped on the engaged tone problem you have. Do you have
> the
> ability to log your SIP messages on your device ? You should be bale
> to see
> that when calling an engaged number we send a packet like this:
>
> Received from udp:80.249.108.21:5060 at 3/1/2007 10:14:45:670
> (364 bytes):
>
> SIP/2.0 480 Temporarily Unavailable
> Via: SIP/2.0/UDP
> 192.168.0.120:2051;received=84.103.168.194;branch=z9hG4bK-ot33hkwcfea9
> ;r port
> =2051
> To: <sip:01908764186@proxy.voip.co.uk;user=phone>;tag=4db78e43
> From: "SUPPORT"<sip:721448@proxy.voip.co.uk>;tag=6t6hea6oh5
> Call-ID: 3c2680cbe7ef-8z9x24ib96uq@snom360-0004132323B9
> CSeq: 2 INVITE
> Content-Length: 0
>
> The message sent is '480 Temporarily Unavailalbe'. Your device should
> then
> generate the tone to this message. If you are getting silence this
> will be a
> configuration issue on your device - unfortunately I am not familiar
> enough
> with this device to tell you where."
>[/color]

Mick was thinking very hard :[color=blue]
> Folks
>
> Using a Sipura 1001 ATA - correctly configured as far as I can see to
> provide me with an engaged tone.
>
> My problem is that if i ring a number that is engaged, I get no engaged
> (or any other) tone.
> I have checked this out by dialling the same number wth a mobile.
>
> I subscribe to both Sipgate and Voip.co.uk through the one ATA.
>
> I have raied the issue with .co.uk and have had the below response.[/color]
[color=blue][color=green]
>> So .... my first question to the forum is ....... do I have the
>> ability to log SIP messages on my SIPURA 1001 - and if so how!?
>>[/color][/color]


There's a syslog server that you can download -
<http://www.sipura.com/support/slogsrv.zip>

Logged in as admin/advanced:

On the System tab of your SPA, set deubug to 3, enter the IP address of
the machine on your network that is running the slogserv.exe program,
in both the Debug Server: & Syslog Server fields.

Launch slogsrv.exe & make a call.

Jono wrote:
[color=blue]
> Mick was thinking very hard :[color=green]
> > Folks
> >
> > Using a Sipura 1001 ATA - correctly configured as far as I can see
> > to provide me with an engaged tone.
> >
> > My problem is that if i ring a number that is engaged, I get no
> > engaged (or any other) tone.
> > I have checked this out by dialling the same number wth a mobile.
> >
> > I subscribe to both Sipgate and Voip.co.uk through the one ATA.
> >
> > I have raied the issue with .co.uk and have had the below response.[/color]
>[color=green][color=darkred]
> > > So .... my first question to the forum is ....... do I have the
> > > ability to log SIP messages on my SIPURA 1001 - and if so how!?
> > >[/color][/color]
>
>
> There's a syslog server that you can download -
> <http://www.sipura.com/support/slogsrv.zip>
>
> Logged in as admin/advanced:
>
> On the System tab of your SPA, set deubug to 3, enter the IP address
> of the machine on your network that is running the slogserv.exe
> program, in both the Debug Server: & Syslog Server fields.
>
> Launch slogsrv.exe & make a call.[/color]

Thank you very much indeed.

Mick

--

Mick explained on 04/01/2007 :
[color=blue][color=green]
>> There's a syslog server that you can download -
>> <http://www.sipura.com/support/slogsrv.zip>
>>
>> Logged in as admin/advanced:
>>
>> On the System tab of your SPA, set deubug to 3, enter the IP address
>> of the machine on your network that is running the slogserv.exe
>> program, in both the Debug Server: & Syslog Server fields.
>>
>> Launch slogsrv.exe & make a call.[/color]
>
> Thank you very much indeed.[/color]

No probs.

It's a useful programme for diagnosing problems with Dial Plans, as it
shows exactly what numbers your SPA is sending to the service provider.