UKVoIPTalk.com

On Wed, 03 Jan 2007 13:48:27 GMT, Pet @ [url]www.gymratz.co.uk[/url] ;¬) wrote:
[color=blue]
>I see cheap.com are advertising ...[/color]

My browser says:
We can't find "cheap.com"

cheap.com? wrote:[color=blue]
> On Wed, 03 Jan 2007 13:48:27 GMT, Pet @ [url]www.gymratz.co.uk[/url] ;¬) wrote:
>[color=green]
>> I see cheap.com are advertising ...[/color]
>
> My browser says:
> We can't find "cheap.com"[/color]

It was an abreviation of the Subject. I didn't want to spam
[url]www.voipcheap.com[/url] in every post.

--
[url]http://gymratz.co.uk[/url] - Best Gym Equipment & Bodybuilding Supplements UK.
[url]http://gymratz.co.uk/polar-heart-rate-monitors/[/url] Polar HeartRate Monitors
[url]http://fitness-equipment-uk.com[/url] - UK's No.1 Fitness Equipment Suppliers.
[url]http://water-rower.co.uk[/url] - Worlds best prices on the Worlds best Rower.

"andy" <andy.ggrps@googlemail.com> wrote in message
news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...

You can send a caller ID, but at the moment only mobile numbers can be
validated for this (by receiving an sms)

Interesting. Just got the latest version of the softphone and indeed it is
on there (but is a bit tardy sending the sms). I take it this will work
through an ATA as well as their softphone (or do I need to add any
configuration ?)

"Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote in message
news:oJQmh.16547$CR3.13291@newsfe6-win.ntli.net...[color=blue]
> "andy" <andy.ggrps@googlemail.com> wrote in message
> news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...
>
> You can send a caller ID, but at the moment only mobile numbers can be
> validated for this (by receiving an sms)
>
> Interesting. Just got the latest version of the softphone and indeed it
> is on there (but is a bit tardy sending the sms). I take it this will
> work through an ATA as well as their softphone (or do I need to add any
> configuration ?)[/color]

Can't get it to work on the ATA. Any ideas anyone???

Herman wrote:
[color=blue][color=green]
>> Interesting. Just got the latest version of the softphone and indeed it
>> is on there (but is a bit tardy sending the sms). I take it this will
>> work through an ATA as well as their softphone (or do I need to add any
>> configuration ?)[/color]
>
> Can't get it to work on the ATA. Any ideas anyone???[/color]

Nope.
I set it up using softphone, but when you dial through an independant
device the softphone stated you are logged in elsewhere and caller ID is
not presented.

Pah!

--
[url]http://gymratz.co.uk[/url] - Best Gym Equipment & Bodybuilding Supplements UK.
[url]http://gymratz.co.uk/polar-heart-rate-monitors/[/url] Polar HeartRate Monitors
[url]http://fitness-equipment-uk.com[/url] - UK's No.1 Fitness Equipment Suppliers.
[url]http://water-rower.co.uk[/url] - Worlds best prices on the Worlds best Rower.

Herman wrote:[color=blue]
> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote in message
> news:oJQmh.16547$CR3.13291@newsfe6-win.ntli.net...[color=green]
> > "andy" <andy.ggrps@googlemail.com> wrote in message
> > news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...
> >
> > You can send a caller ID, but at the moment only mobile numbers can be
> > validated for this (by receiving an sms)
> >
> > Interesting. Just got the latest version of the softphone and indeed it
> > is on there (but is a bit tardy sending the sms). I take it this will
> > work through an ATA as well as their softphone (or do I need to add any
> > configuration ?)[/color]
>
> Can't get it to work on the ATA. Any ideas anyone???[/color]

I hadn't, as although I suggested it's there I haven't done it yet,
neither do I have an ATA myself

but I just read this on the Voipbuster forum, which might be
interesting ...

"Problem was, in the voipbuster PC application, I had the verified
mobile number set as +316XXXXX. This works when using the PC, but not
when using the SMC router ATA. I changed the setting in the voipbuster
application to 00316XXXXX, redid the verification SMS bit, and now
caller-id presentation also works on the SMC router ATA too! "

Maybe ATAs can't do + as it's a GSM feature - could be worth a try with
00 instead if you haven't already ...

"andy" <andy.ggrps@googlemail.com> wrote in message
news:1167922492.403826.157820@6g2000cwy.googlegroups.com...[color=blue]
>
> Herman wrote:[color=green]
>> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote in message
>> news:oJQmh.16547$CR3.13291@newsfe6-win.ntli.net...[color=darkred]
>> > "andy" <andy.ggrps@googlemail.com> wrote in message
>> > news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...
>> >
>> > You can send a caller ID, but at the moment only mobile numbers can be
>> > validated for this (by receiving an sms)
>> >
>> > Interesting. Just got the latest version of the softphone and indeed
>> > it
>> > is on there (but is a bit tardy sending the sms). I take it this will
>> > work through an ATA as well as their softphone (or do I need to add any
>> > configuration ?)[/color]
>>
>> Can't get it to work on the ATA. Any ideas anyone???[/color]
>
> I hadn't, as although I suggested it's there I haven't done it yet,
> neither do I have an ATA myself
>
> but I just read this on the Voipbuster forum, which might be
> interesting ...
>
> "Problem was, in the voipbuster PC application, I had the verified
> mobile number set as +316XXXXX. This works when using the PC, but not
> when using the SMC router ATA. I changed the setting in the voipbuster
> application to 00316XXXXX, redid the verification SMS bit, and now
> caller-id presentation also works on the SMC router ATA too! "
>
> Maybe ATAs can't do + as it's a GSM feature - could be worth a try with
> 00 instead if you haven't already ...[/color]

Gave it a go but it wouldn't work. Guess it must just be a loophole that
his router can exploit. Tried to look at the forum in case there were some
other hints but you have to register to see it and voipcheap.com do not have
a forum.

Thus spaketh Herman:[color=blue]
> "andy" <andy.ggrps@googlemail.com> wrote in message
> news:1167922492.403826.157820@6g2000cwy.googlegroups.com...[color=green]
>>
>> Herman wrote:[color=darkred]
>>> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote in message
>>> news:oJQmh.16547$CR3.13291@newsfe6-win.ntli.net...
>>>> "andy" <andy.ggrps@googlemail.com> wrote in message
>>>> news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...
>>>>
>>>> You can send a caller ID, but at the moment only mobile numbers
>>>> can be validated for this (by receiving an sms)
>>>>
>>>> Interesting. Just got the latest version of the softphone and
>>>> indeed it
>>>> is on there (but is a bit tardy sending the sms). I take it this
>>>> will work through an ATA as well as their softphone (or do I need
>>>> to add any configuration ?)
>>>
>>> Can't get it to work on the ATA. Any ideas anyone???[/color]
>>
>> I hadn't, as although I suggested it's there I haven't done it yet,
>> neither do I have an ATA myself
>>
>> but I just read this on the Voipbuster forum, which might be
>> interesting ...
>>
>> "Problem was, in the voipbuster PC application, I had the verified
>> mobile number set as +316XXXXX. This works when using the PC, but not
>> when using the SMC router ATA. I changed the setting in the
>> voipbuster application to 00316XXXXX, redid the verification SMS
>> bit, and now caller-id presentation also works on the SMC router ATA
>> too! " Maybe ATAs can't do + as it's a GSM feature - could be worth
>> a try
>> with 00 instead if you haven't already ...[/color]
>
> Gave it a go but it wouldn't work. Guess it must just be a loophole
> that his router can exploit. Tried to look at the forum in case
> there were some other hints but you have to register to see it and
> voipcheap.com do not have a forum.[/color]

No that they don't, everyone just uses the VoIPBuster forum.

On a Linksys / Sipura device:

Use AuthID: yes
Auth ID: Your Username
User ID: Your verified phone number

"{{{{{Welcome}}}}}" <bhx___spam@trapped___hotmail.co.uk> wrote in message
news:8Venh.25740$k74.25632@text.news.blueyonder.co.uk...[color=blue]
> Thus spaketh Herman:[color=green]
>> "andy" <andy.ggrps@googlemail.com> wrote in message
>> news:1167922492.403826.157820@6g2000cwy.googlegroups.com...[color=darkred]
>>>
>>> Herman wrote:
>>>> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote in message
>>>> news:oJQmh.16547$CR3.13291@newsfe6-win.ntli.net...
>>>>> "andy" <andy.ggrps@googlemail.com> wrote in message
>>>>> news:1167830675.240918.151840@a3g2000cwd.googlegroups.com...
>>>>>
>>>>> You can send a caller ID, but at the moment only mobile numbers
>>>>> can be validated for this (by receiving an sms)
>>>>>
>>>>> Interesting. Just got the latest version of the softphone and
>>>>> indeed it
>>>>> is on there (but is a bit tardy sending the sms). I take it this
>>>>> will work through an ATA as well as their softphone (or do I need
>>>>> to add any configuration ?)
>>>>
>>>> Can't get it to work on the ATA. Any ideas anyone???
>>>
>>> I hadn't, as although I suggested it's there I haven't done it yet,
>>> neither do I have an ATA myself
>>>
>>> but I just read this on the Voipbuster forum, which might be
>>> interesting ...
>>>
>>> "Problem was, in the voipbuster PC application, I had the verified
>>> mobile number set as +316XXXXX. This works when using the PC, but not
>>> when using the SMC router ATA. I changed the setting in the
>>> voipbuster application to 00316XXXXX, redid the verification SMS
>>> bit, and now caller-id presentation also works on the SMC router ATA
>>> too! " Maybe ATAs can't do + as it's a GSM feature - could be worth a
>>> try
>>> with 00 instead if you haven't already ...[/color]
>>
>> Gave it a go but it wouldn't work. Guess it must just be a loophole
>> that his router can exploit. Tried to look at the forum in case
>> there were some other hints but you have to register to see it and
>> voipcheap.com do not have a forum.[/color]
>
> No that they don't, everyone just uses the VoIPBuster forum.
>
> On a Linksys / Sipura device:
>
> Use AuthID: yes
> Auth ID: Your Username
> User ID: Your verified phone number[/color]

Yes I was trying to use the equivalent on a Fritzbox (Auth ID is called
Internet Number). Selected "use internet number for registration", and
tried to call my mobile - didn't work. However, it did work when I called
my voip.co.uk number. I think it may work on calls to landline numbers but
not to mobiles. I haven't got a BT/cable landline to check my theory.

Herman expressed precisely :
[color=blue][color=green]
>>
>> On a Linksys / Sipura device:
>>
>> Use AuthID: yes
>> Auth ID: Your Username
>> User ID: Your verified phone number[/color]
>
> Yes I was trying to use the equivalent on a Fritzbox (Auth ID is called
> Internet Number). Selected "use internet number for registration", and tried
> to call my mobile - didn't work. However, it did work when I called my
> voip.co.uk number. I think it may work on calls to landline numbers but not
> to mobiles. I haven't got a BT/cable landline to check my theory.[/color]

......are you using voipcheap.com....?

WRT presentation number to mobiles - are you testing with Vodafone, by
any chance?