BT Voyager 10v working on Sipgate

[mcmliix]

I now have two of BT's Voyager 10v working on Sipgate.

both lines are working well so at least the box has some kind of life left.

If anyone wants the method let me know and I'll post here

it's not very elegant but it works

[mcmliix]

SETUP FOR SIPGATE.CO.UK
===================

using the units IP address Telnet into the 10v

ENTER THE FOLLOWING:-


sip set reg_srv sipgate.co.uk

sip set domain sipgate.co.uk

sip set outbound_pxy sipgate.co.uk

sip set reg_mode 1

net set nat 0

net set dnsmode 1


++++++++++++++++++++++++++++++ LINE 1

sip set tel_num 1 (((SIPGATE REG NUMBER)))

sip set reg_id 1 (((SIPGATE REG NUMBER)))

sip set reg_pwd 1 (((SIPGATE REG PASSWORD)))

sip set tel_name 1 (((SIPGATE TEL NUMBER)))



++++++++++ IF LINE 2 IS TO BE USED ENTER +++

sip set tel_num 2 (((SIPGATE REG NUMBER)))

sip set reg_id 2 (((SIPGATE REG NUMBER)))

sip set reg_pwd 2 (((SIPGATE REG PASSWORD)))

sip set tel_name 2 (((SIPGATE TEL NUMBER)))


++++++++++ LOGOUT OF TELNET ++++++++++++++++++++++++++++++

Now open the web interface and follow the quick set-up at the first BT screen
(THIS WILL SAVE THE SETTINGS YOU HAVE JUST MADE)

[pmaheepala]

Yes it works! Thank you so much mate!