"It's Me" <spam@spam.spam> wrote in message
news:464f0e7f$0$10736$db0fefd9@news.zen.co.uk...[color=blue]
>
> "Rich" <richdotward@gmail.com> wrote in message
> news:3mlt439pisfph28p7sjft4mn6kul981gqh@4ax.com...[color=green]
> > Hi
> >
> > Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
> > today. I'm having problems getting it to work.
> >
> > Done a google but still no joy.
> >
> > Dial **** to access the IVR Menu, then enter 110#
> >
> > It then reads out : 192.168.15.113
> >
> > 100# Check DHCP (ENABLED)
> > 101# Set DHCP (1=enable, 0=disable)
> > 110# Check IP address - (192.168.15.113)
> > 111# Set IP address (* = .)
> > 120# Check Netmask - (255.255.255.0)
> > 121# Set Net Mask (* = .)
> > 130# Check Gateway - (192.168.15.1)
> > 131# Set Gateway (* = .)
> > 140# Check MAC Address
> > 150# Check Firmware Version = (3.1.9C)
> > 732668# Manual Reboot of Unit
> >
> > My netgear router doesn't see the adaptor : see below basic details on
> > the router network.
> >
> > ADSL Port
> > MAC Address 00:18:4D:11:F8:69
> > IP Address ##.##.##.## (Internet IP)
> > Network Type PPPoA
> > IP Subnet Mask 255.255.255.255
> > Gateway IP Address 195.189.158.102
> > Domain Name Server 87.86.189.16
> >
> > LAN Port
> > MAC Address 00:18:4D:11:F8:68
> > IP Address 192.168.0.1
> > DHCP On
> > IP Subnet Mask 255.255.255.0
> >
> > The only way I've managed to get into the PAP2 configuration menu is
> > to turn off DCHP and allocate a static IP - in this case 192.168.0.55
> > (but the router still doesn't see the adaptor) but I can login to the
> > web frontend via Firefox.
> >
> > DHCP: Disabled Current IP: 192.168.0.55
> > Host Name: LinksysPAP Domain:
> > Current Netmask: 0.0.0.0 Current Gateway:
> > 0.0.0.0
> > Primary DNS:
> > Secondary DNS:
> > Product Information
> > Product Name: PAP2-NA Serial Number: FH900EC15081
> > Software Version: 3.1.9(LSc) Hardware
> > Version: 0.03.4
> > MAC Address: 371217FD5031 Client Certificate:
> > Installed
> > Customization: Not Customized
> > System Status
> > Current Time: 1/1/2003 12:07:14 Elapsed Time:
> > 00:00:07
> > Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
> > 0
> > Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
> > 0
> > Broadcast Pkts Dropped: 0 Broadcast Bytes
> > Dropped: 0
> > RTP Packets Sent: 0 RTP Bytes Sent: 0
> > RTP Packets Recv: 0 RTP Bytes Recv: 0
> > SIP Messages Sent: 0 SIP Bytes Sent: 0
> > SIP Messages Recv: 0 SIP Bytes Recv: 0
> > External IP:
> >
> > Looking at the above stats - seems to be that the internet is not
> > accessable - No external IP?
> >
> > Any ideas where I'm going wrong? Ideally I want the router to detect
> > it and allocate a IP address on the internet network accordlying.
> >
> > Can anyone help?
> >
> > Thanks.
> >
> > Rich[/color]
>
> I have a netgear router DG 834G and I had same thing the other day.
>
> Do what Loz said, set Default gateway to 192.168.0.1
>
> Did you buy it off billionax? If so why does it sate "Software Version:
> 3.1.9(LSc)"
>
> It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
> access the ADMIN settings?
>
> Make sure you set "Provision Enable is set to NO."
>
> I updated mine to "v3.1.22-LS"
>
>[/color]
How did you load the firmware if it was locked?
Have a PAP2 that I bought understanding it was
unlocked, it isn't. Can't do anything with it and all
my internet searches suggest the same.

I've nothing to loose by having a play if you wouldn't
mind telling me how to and the location of the code.