"Rich" <richdotward@gmail.com> wrote in message
news:3mlt439pisfph28p7sjft4mn6kul981gqh@4ax.com...[color=blue]
> Hi
>
> Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
> today. I'm having problems getting it to work.
>
> Done a google but still no joy.
>
> Dial **** to access the IVR Menu, then enter 110#
>
> It then reads out : 192.168.15.113
>
> 100# Check DHCP (ENABLED)
> 101# Set DHCP (1=enable, 0=disable)
> 110# Check IP address - (192.168.15.113)
> 111# Set IP address (* = .)
> 120# Check Netmask - (255.255.255.0)
> 121# Set Net Mask (* = .)
> 130# Check Gateway - (192.168.15.1)
> 131# Set Gateway (* = .)
> 140# Check MAC Address
> 150# Check Firmware Version = (3.1.9C)
> 732668# Manual Reboot of Unit
>
> My netgear router doesn't see the adaptor : see below basic details on
> the router network.
>
> ADSL Port
> MAC Address 00:18:4D:11:F8:69
> IP Address ##.##.##.## (Internet IP)
> Network Type PPPoA
> IP Subnet Mask 255.255.255.255
> Gateway IP Address 195.189.158.102
> Domain Name Server 87.86.189.16
>
> LAN Port
> MAC Address 00:18:4D:11:F8:68
> IP Address 192.168.0.1
> DHCP On
> IP Subnet Mask 255.255.255.0
>
> The only way I've managed to get into the PAP2 configuration menu is
> to turn off DCHP and allocate a static IP - in this case 192.168.0.55
> (but the router still doesn't see the adaptor) but I can login to the
> web frontend via Firefox.
>
> DHCP: Disabled Current IP: 192.168.0.55
> Host Name: LinksysPAP Domain:
> Current Netmask: 0.0.0.0 Current Gateway:
> 0.0.0.0
> Primary DNS:
> Secondary DNS:
> Product Information
> Product Name: PAP2-NA Serial Number: FH900EC15081
> Software Version: 3.1.9(LSc) Hardware
> Version: 0.03.4
> MAC Address: 371217FD5031 Client Certificate:
> Installed
> Customization: Not Customized
> System Status
> Current Time: 1/1/2003 12:07:14 Elapsed Time:
> 00:00:07
> Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
> 0
> Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
> 0
> Broadcast Pkts Dropped: 0 Broadcast Bytes
> Dropped: 0
> RTP Packets Sent: 0 RTP Bytes Sent: 0
> RTP Packets Recv: 0 RTP Bytes Recv: 0
> SIP Messages Sent: 0 SIP Bytes Sent: 0
> SIP Messages Recv: 0 SIP Bytes Recv: 0
> External IP:
>
> Looking at the above stats - seems to be that the internet is not
> accessable - No external IP?
>
> Any ideas where I'm going wrong? Ideally I want the router to detect
> it and allocate a IP address on the internet network accordlying.
>
> Can anyone help?
>
> Thanks.
>
> Rich[/color]

I have a netgear router DG 834G and I had same thing the other day.

Do what Loz said, set Default gateway to 192.168.0.1

Did you buy it off billionax? If so why does it sate "Software Version:
3.1.9(LSc)"

It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
access the ADMIN settings?

Make sure you set "Provision Enable is set to NO."

I updated mine to "v3.1.22-LS"