On Fri, 18 May 2007 22:41:53 GMT, Brian A
<no_spam_bca1000@hotmail.com> wrote:
[color=blue]
>[color=green][color=darkred]
>>>Keep you posted.[/color]
>>
>>Got it going about 5 mins. before having to go out to work. I have set
>>it up with Voiptalk.org with a UK number, and at the moment is
>>configured to transfer calls coming in, on PTSN back out over VOIP, to
>>my Spanish Mobile number (I live/work in Spain) it works very well,
>>much better than my first attempts with SKPE. Couple of things before
>>I start getting stuck in with call plans etc. I used the recommended
>>settings on the LinkSys site to set up the divert, but a couple of
>>problems. The PTSN line is allowed to ring a few times before being
>>diverted to Voip, thus people give up waiting for me to answer. The
>>other problem is the speech volume level is too low, any pointers
>>please.[/color]
>Yes, the FXS gain is adjustable. Also make sure the FXS impedance is
>set correctly. On the SPA-3000 these are on the 'Regional' tab - may
>be same for SPA-3102.
>Remove 'no_spam_' from email address.[/color]

Brian, I think I did not explain my self very well. When I meant the
volume was too low, I meant the volume I was receiving on my mobile,
after it had been diverted from my incoming PTSN call, back out over
VOIP to my mobile. Does what you suggest still apply, don't want to
start messing around with settings I do not understand.

On that subject, there are so many options in the set-up menu that I
wondered if there was a manual that somebody has written which
explains all of these options?