Hi

Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
today. I'm having problems getting it to work.

Done a google but still no joy.

Dial **** to access the IVR Menu, then enter 110#

It then reads out : 192.168.15.113

100# Check DHCP (ENABLED)
101# Set DHCP (1=enable, 0=disable)
110# Check IP address - (192.168.15.113)
111# Set IP address (* = .)
120# Check Netmask - (255.255.255.0)
121# Set Net Mask (* = .)
130# Check Gateway - (192.168.15.1)
131# Set Gateway (* = .)
140# Check MAC Address
150# Check Firmware Version = (3.1.9C)
732668# Manual Reboot of Unit

My netgear router doesn't see the adaptor : see below basic details on
the router network.

ADSL Port
MAC Address 00:18:4D:11:F8:69
IP Address ##.##.##.## (Internet IP)
Network Type PPPoA
IP Subnet Mask 255.255.255.255
Gateway IP Address 195.189.158.102
Domain Name Server 87.86.189.16

LAN Port
MAC Address 00:18:4D:11:F8:68
IP Address 192.168.0.1
DHCP On
IP Subnet Mask 255.255.255.0

The only way I've managed to get into the PAP2 configuration menu is
to turn off DCHP and allocate a static IP - in this case 192.168.0.55
(but the router still doesn't see the adaptor) but I can login to the
web frontend via Firefox.

DHCP: Disabled Current IP: 192.168.0.55
Host Name: LinksysPAP Domain:
Current Netmask: 0.0.0.0 Current Gateway:
0.0.0.0
Primary DNS:
Secondary DNS:
Product Information
Product Name: PAP2-NA Serial Number: FH900EC15081
Software Version: 3.1.9(LSc) Hardware
Version: 0.03.4
MAC Address: 371217FD5031 Client Certificate:
Installed
Customization: Not Customized
System Status
Current Time: 1/1/2003 12:07:14 Elapsed Time:
00:00:07
Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
0
Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
0
Broadcast Pkts Dropped: 0 Broadcast Bytes
Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 0 SIP Bytes Sent: 0
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP:

Looking at the above stats - seems to be that the internet is not
accessable - No external IP?

Any ideas where I'm going wrong? Ideally I want the router to detect
it and allocate a IP address on the internet network accordlying.

Can anyone help?

Thanks.

Rich