"Adrian" <adrian_h_hudson@yahoo.com> wrote in message
news:1178488916.213143.285850@n59g2000hsh.googlegroups.com

[snip]
[color=blue]
> Then I checked the telephony options. I set the region
> to "United Kingdom". I am using UK kit on UK numbers.
> The box says that that both phone ports are "looking @"
> my AQL VoIP account. But, no telephone lights are "on"
> on the box. The only lights "on" are power and DSL.
> Moreover when I plug in a telephone set, I only hear an
> "Out of Service" tone. I am unable to dial or receive
> calls.[/color]

They are the only lights that should be on in standby mode. The fixed line
and internet phone LEDs only come on while a call is in progress, the
internet one should light when you lift the handset of a connected phone.
What are you calling an "out of service" tone..? Note that the Fritz uses
German tones, irrespective of the regional settings, so the dial tone
sounds very similar to the UK number unobtainable tone.

If you can configure a Sipgate account, try calling my speaking clock on
1431320.

Ivor