"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.74f47d7376ea1a5d.48968@blueyonder.invalid...[color=blue]
> Port Admiral Haynes formulated on Wednesday :[color=green]
>> "Jono" <nothanks@blueyonder.invalid> wrote in message
>> news:mn.74647d73199eb91e.67798@blueyonder.invalid...[color=darkred]
>>> Port Admiral Haynes explained on 14/03/2007 :
>>>> I have a SPA3102 I am struggling to get to grips with! Despite caller
>>>> display problems, which I am working on, I decided to go live with it
>>>> and plug my house phone system into it. I have 5 NTL VS2000 DECT
>>>> Handsets scattered around the house.
>>>>
>>>> Previously when we had an incoming call via my BT line, that was for
>>>> someone else we used to press the "hang up" and then shout "it's for
>>>> yoooo" ! The other person pressed the dial key on another handset and
>>>> the call could be picked up from there. Just tried this during a PSTN
>>>> call and when I pressed hang up it hung up and when the other person
>>>> tried to take up the call they had been cut off!
>>>>
>>>> Any suggestions?
>>>
>>> Try pressing the recall button before you hang up. With any luck, your
>>> phones will start ringing again....
>>>
>>>[/color]
>>
>> Sorted! Thank you - now back to the Caller ID Problem![/color]
>
> Flippin' 'eck.
>
> I thought you'd discovered it was a failing of the phone, not the ATA...?
>[/color]

I am sure you are right - it's just that I have tried four different makes
of DECT phone. Three gave the truncated caller display whilst the fourth -
an old Philips phone with no ability to store names in the phone book -
worked. Also if I power off the ATA and dial in on my PSTN line the caller
display is correct on all phones.

I am going to post my config on Voxilla when I get a moment so you can look
at my config.

Thank you for your continuing help.