Graham Wrote:[color=blue]
> "olavtheviking" [email]olavtheviking.2k06pk@broadbandbanter.co.uk[/email] wrote in
> message news:olavtheviking.2k06pk@broadbandbanter.co.uk...-
>
> I have recently purchased an unlocked Linksys PAP2 voip adaptor, as I
> wish to use BT BB talk, using my Bt broadband connection, I have
> connected this device as per the set up instructions to my Linksys
> router (wireless G Gateway, model WPC54G) Alas there is no broadband
> dial tone on the phone? I have a steady power LED and a steady
> ethernet
> LED but no phone 1 or phone 2 LED on the voip adapter. Wondered if
> anyone may be able to help out? are any other settings or
> configurations required?
> Many thanks
> Graham
>
>
>
>
> --
> olavtheviking-
>
> You don't say what configuration you have done to the PAP2
> If you are expecting a dial tone out of the box, you wont get one.
> Connect a phone and dial **** (four stars)
> A voice responce should announce "configuration menu"
> now dial 110# and write down the IP address.
> Now open a web-browser on a computer on your network
> and browse to that address.
>
> Come back when you have got that far
> BTW there are better ways of reading and posting to Usenet
> Newsgroups than the method you are using.
> --
>
> Graham.
> %Profound_observation%[/color]

Graham, thanks for your reply,
I have entered in some details to my router, info I obtained from the
user guide CD bundled with the phone adaptor, this was in the 'port
forwarding' settings - 5060-5061, 53-53, 69-69 & 10000-20000 all UDP
I have tried, as you suggest, dialling **** but no response tried 2
other analogue phones also on both ports also with no response - a good
start?! Have contacted Linksys and they say the unit may be faulty a
replacement is to be sent out to me!
Could you explain more about the methods of reading and posting to
Usenet newsgroups please?
Regards
Graham




--
olavtheviking