"olavtheviking" <olavtheviking.2k06pk@broadbandbanter.co.uk> wrote in
message news:olavtheviking.2k06pk@broadbandbanter.co.uk...[color=blue]
>
> I have recently purchased an unlocked Linksys PAP2 voip adaptor, as I
> wish to use BT BB talk, using my Bt broadband connection, I have
> connected this device as per the set up instructions to my Linksys
> router (wireless G Gateway, model WPC54G) Alas there is no broadband
> dial tone on the phone? I have a steady power LED and a steady ethernet
> LED but no phone 1 or phone 2 LED on the voip adapter. Wondered if
> anyone may be able to help out? are any other settings or
> configurations required?
> Many thanks
> Graham
>
>
>
>
> --
> olavtheviking[/color]

You don't say what configuration you have done to the PAP2
If you are expecting a dial tone out of the box, you wont get one.
Connect a phone and dial **** (four stars)
A voice responce should announce "configuration menu"
now dial 110# and write down the IP address.
Now open a web-browser on a computer on your network
and browse to that address.

Come back when you have got that far
BTW there are better ways of reading and posting to Usenet
Newsgroups than the method you are using.
--

Graham.
%Profound_observation%