Folks

Using a Sipura 1001 ATA - correctly configured as far as I can see to
provide me with an engaged tone.

My problem is that if i ring a number that is engaged, I get no engaged
(or any other) tone.
I have checked this out by dialling the same number wth a mobile.

I subscribe to both Sipgate and Voip.co.uk through the one ATA.

I have raied the issue with .co.uk and have had the below response.....[color=blue]
> So .... my first question to the forum is ....... do I have the
> ability to log SIP messages on my SIPURA 1001 - and if so how!?
>
> Thanks[/color]

Mick
--

From Voip.co.uk ............
[color=blue]
> I am a bit stumped on the engaged tone problem you have. Do you have
> the
> ability to log your SIP messages on your device ? You should be bale
> to see
> that when calling an engaged number we send a packet like this:
>
> Received from udp:80.249.108.21:5060 at 3/1/2007 10:14:45:670
> (364 bytes):
>
> SIP/2.0 480 Temporarily Unavailable
> Via: SIP/2.0/UDP
> 192.168.0.120:2051;received=84.103.168.194;branch=z9hG4bK-ot33hkwcfea9
> ;r port
> =2051
> To: <sip:01908764186@proxy.voip.co.uk;user=phone>;tag=4db78e43
> From: "SUPPORT"<sip:721448@proxy.voip.co.uk>;tag=6t6hea6oh5
> Call-ID: 3c2680cbe7ef-8z9x24ib96uq@snom360-0004132323B9
> CSeq: 2 INVITE
> Content-Length: 0
>
> The message sent is '480 Temporarily Unavailalbe'. Your device should
> then
> generate the tone to this message. If you are getting silence this
> will be a
> configuration issue on your device - unfortunately I am not familiar
> enough
> with this device to tell you where."
>[/color]