Jono wrote:[color=blue]
> [email]gvido.sprogis@gmail.com[/email] used his keyboard to write :[color=green]
> > HI!
> > I have posted my problem in other forums, but without any results.
> > so here is my problem!
> > I have a door lock (Farfisa). at the doors is ring button, connected
> > with Fiarfisa. To open a doors, if the button has been pressed, I have
> > to pick-up the phone connected with Sipura, and press to times button
> > 'R'.
> > Sipura Line is connected with Farfisa, but phone is connected with
> > desk-phone.
> > When I'm pressing 2 times button 'R', nothing is happening :(
> > could you please give some tips or something else, to solve this
> > problem ;)
> > PSTN Line dialplan is: (SO<:303@192.168.1.51:5060>)
> > Preferred Codec: G711u
> > DTMF Process INFO: yes
> > DTMF Process AVT: yes
> > DTMF Tx Method: Auto
> >
> > Line 1 dial plan is (.xx)
> > Enable IP Dialing: yes
> > Preferred Codec:G729a
> > Use Pref Codec Only: no
> > DTMF Process INFO: yes
> > DTMF Process AVT: yes
> > DTMF Tx Method: Auto
> > Hook Flash Tx Method: None
> >
> >
> > I have tryed everything, but with no use.
> > It would be great, if You could help me =)[/color]
>
> I assume it's an SPA3000 or SPA3102...?
>
> Why have you got this? Hook Flash Tx Method: None - Is this the Line
> One page, rather than the PSTN page?
>
> Hook flash is what you're trying to accomplish.
>
> There is also a setting "Line 1 Signal Hook Flash To PSTN:" which can
> either be disabled or set to Double Hook Flash. (Find this on the PSTN
> page)
>
> I'm not quite clear how you've got things connected.
>
> If someone presses the doorbell, does the phone on Line One ring? Is
> the Fiarfisa connected as if it is a PSTN line to the Sipura?[/color]


It is SPA 3000

When I got my job, SPA 3000 already was there!

I have tried everything in Hook Flash Method in Line 1 and PSTN line

it's connected easy-
Farfisa - External door stations
Doors - I'm using Farfisa together with door bell, Electronic door
speaker and door lock.
Wall- Farfisa central.
When I press the door bell, door farfisa is sending the singnal to wall
farfisa. from wall farfisa it goes to sipura and then to the phone.
from wall farfisa is going out telephone line into sipura line. then
allowing IP Dialing the the signal goes to the phone (my IP dial plan
PSTN line: (SO<: 303@192.168.1.51:5060>) )
If I have understund the problem correct, than the DTMF signal isn't
going from phone throught sipura to the farfisa and then to the door
lock!
If I'm using dirrect conection from farfisa to the phone, the:
1) I press the door bell
2) Door farfisa is sending to the wall farfisa signal, that the bell
has been pressed
3) Wall farfisa then sends signal to the phone
4) the phone is ringing
5) I pick up the phone, press two times button 'R' and the door lock
opns the doors.

If I'm using sipura, the
1) I press the door bell
2) Door farfisa is sending to the wall farfisa signal, that the bell
has been pressed
3) Wall farfisa sends signal to the sipura
4) sipura using IP dialing sends the signal to the connecet phone
5) the phone is ringing
6) I pick up the phone, two times press the button 'R' and nothing is
happening =(
sipura Line1 configuration:
DTMF Process INFO:yes
DTMF Process AVT:yes
DTMF Tx Method: INFO
Hook Flash Tx Method:None

sipura pstn line configuration:
DTMF Process INFO:yes
DTMF Process AVT:yes DTMF Tx Method: Inband


I have tried every possible combination to solve this problem!