On Fri, 29 Dec 2006 16:19:46 GMT, "{{{{{Welcome}}}}}"
<bhx___spam@trapped___hotmail.co.uk> wrote:
[color=blue]
>Thus spaketh Brian A:[color=green]
>> On Fri, 29 Dec 2006 15:12:26 GMT, Jono
>> <nothanks@nospamplease.bluyonder.co.uk.com> wrote:
>>[color=darkred]
>>> [email]gvido.sprogis@gmail.com[/email] used his keyboard to write :[/color]
>>[color=darkred]
>>>
>>> I assume it's an SPA3000 or SPA3102...?
>>>
>>> Why have you got this? Hook Flash Tx Method: None - Is this the Line
>>> One page, rather than the PSTN page?
>>>
>>> Hook flash is what you're trying to accomplish.
>>>
>>> There is also a setting "Line 1 Signal Hook Flash To PSTN:" which can
>>> either be disabled or set to Double Hook Flash. (Find this on the
>>> PSTN page)
>>>
>>> I'm not quite clear how you've got things connected.
>>>
>>> If someone presses the doorbell, does the phone on Line One ring? Is
>>> the Fiarfisa connected as if it is a PSTN line to the Sipura?
>>>[/color]
>> I don't wish to hijack this thread but I have a problem re hook flash
>> - using SPA-3000.
>> If I get a 'call waiting' tone I can do a standard hook-flash and can
>> switch callers using a wired phone. However, on my cordless, which
>> uses 'timed break' recall, I can't get this to work using the recall
>> button - 'hook flash' just cuts off the current caller.
>> I have tried both SPA-3000, user tab, settings on 'hook flash' and
>> neither work.
>> Any ideas on this one?
>>
>> Remove 'no_spam_' from email address.[/color]
>
>
>
>I use a PAP2 and can switch between callers OK using the recall button
>on both corded and cordless DECT phones.
>
>Hook Flash Timer Min: 0.06
>Hook Flash Timer Max: 0.2
>Callee On Hook Delay: 0
>Reorder Delay: 5
>CPC Delay: 0.5
>CPC Duration: 0.1
>
>Hook Flash Tx Method: NONE[/color]
I entered the values you listed and...whalah!! It works!
Thank you.
Remove 'no_spam_' from email address.