[email]gvido.sprogis@gmail.com[/email] used his keyboard to write :[color=blue]
> HI!
> I have posted my problem in other forums, but without any results.
> so here is my problem!
> I have a door lock (Farfisa). at the doors is ring button, connected
> with Fiarfisa. To open a doors, if the button has been pressed, I have
> to pick-up the phone connected with Sipura, and press to times button
> 'R'.
> Sipura Line is connected with Farfisa, but phone is connected with
> desk-phone.
> When I'm pressing 2 times button 'R', nothing is happening :(
> could you please give some tips or something else, to solve this
> problem ;)
> PSTN Line dialplan is: (SO<:303@192.168.1.51:5060>)
> Preferred Codec: G711u
> DTMF Process INFO: yes
> DTMF Process AVT: yes
> DTMF Tx Method: Auto
>
> Line 1 dial plan is (.xx)
> Enable IP Dialing: yes
> Preferred Codec:G729a
> Use Pref Codec Only: no
> DTMF Process INFO: yes
> DTMF Process AVT: yes
> DTMF Tx Method: Auto
> Hook Flash Tx Method: None
>
>
> I have tryed everything, but with no use.
> It would be great, if You could help me =)[/color]

I assume it's an SPA3000 or SPA3102...?

Why have you got this? Hook Flash Tx Method: None - Is this the Line
One page, rather than the PSTN page?

Hook flash is what you're trying to accomplish.

There is also a setting "Line 1 Signal Hook Flash To PSTN:" which can
either be disabled or set to Double Hook Flash. (Find this on the PSTN
page)

I'm not quite clear how you've got things connected.

If someone presses the doorbell, does the phone on Line One ring? Is
the Fiarfisa connected as if it is a PSTN line to the Sipura?