On 2006-12-16, Stan <SPAM_FOILER@some.domain> wrote:

[Snip]
[color=blue]
> I had never filled in an administrative password for the device, but
> had found that the string "password" was the default that enabled me
> to bring up the PAP2T configuration screens. The reaction of the voice
> to this was "Invalid password". I then tried the four-digit numerical
> password that iConnect issued me. This produced a continuous tone in
> the telephone handset, which never stopped until I hung up. After
> that, even the "****" code doesn't work (no feedback tone in the
> handset receiver), so that the device is totally dead in the water. My
> fear, of course, is that the PAP2T is now a paperweight and nothing
> more.[/color]

[Another snip]
[color=blue]
> If somebody knows a way that I can actually reset the thing, or even
> just to undo the most recent step, which would give me a little hope,
> I would be most happy and grateful. Needless to say, I would then seek
> another solution to the communication problem.[/color]

I thought the Sipura 2000/PAP2 came unconfigured without any passwords
and, in any case, resetting the unit with **** 73738# or **** 877778#
didn't require one. Maybe things have changed since I got mine.

Anyway, to give you something to try: disconnect the router from the
internet and switch off the PAP2. Have a cup of decent coffee.

Reconnect to the power supply but not to the internet. Try **** 110# to
see what the ATA thinks its IP is. If there is a response contact the
unit with http://<PAP2 IP>.

Does any of that work? No. Have another cup of coffee.

Brian.