Ian Pawson explained :[color=blue]
> My SPA3000 will no longer dial out over the pstn line. When I try I get
> the 'reorder' tone, which, according to the manual happens when an
> outgoing call fails. Incoming pstn calls work ok so I assume that there
> is not a cable problem. Monitoring the pstn line show that the spa does
> not seize the line.
>
> My dial plan contains the following: 1471<:@gw0>|0800xx.<:@gw0>
>
> Any ideas where I should start to look for the problem or have I missed
> any settings?[/color]

Have you power cycled it since?