Turandot wrote:[color=blue]
> "PhilT" <newsnet@gmail.com> wrote in message
> news:1157048700.133937.84730@i3g2000cwc.googlegroups.com...[color=green]
> > Does it ring if you take the power off the SPA-3000 so the BT line
> > defaults straight through ? Do you get BT dial tone on the phone ?[/color]
> Yes, when the power is down, BT line rings and I get BT dial tone.[/color]

so the wiring is OK.
[color=blue]
>When the
> power is on, no BT dial tone, I guess this is due to dial plan. Just
> couldn't understand why BT line is not ringing.[/color]

pass. There is usually a delay in it ringing as it buffers CLI. You
don't get a BT dial tone when its powered up and registered as the dial
plan just places the call on the PSTN gateway gw0 in the ATA.

The setup wizard at [url]http://voxilla.com/spa3kconfig.php[/url] is handy. I
can't recall if you explicitly have to enable the PSTN line, on the
"PSTN line" tab I have it set to enable at the top.

Phil

Phil