Ian Pawson wrote:[color=blue]
> Pet - [url]www.GymRatZ.co.uk[/url] wrote:[color=green]
>> Ian Pawson wrote:[color=darkred]
>>> I have an incoming number set for my voipcheap service, but it only
>>> rings when using their windoze app and not when using sip. The sip says
>>> that it is 'registered' and I can make calls ok.
>>> Does anyone know if it is possible to get the incoming number to work
>>> using sip, and if so, how?[/color]
>> Are you sure the ATA device is registered.
>> If you fired up the windoze app. it will register as the primary device,
>> so if you have timing on your ATA set to 60 minutes for example it won't
>> attempt to re-register yet may still show registered on the screen when
>> you log in as that was it's last state. My Draytek usually needs to have
>> the refresh button hit to update the accurate status.
>>
>> To phone out your device doesn't need to be registered, you just need
>> the right user name & password.
>>
>> Also make sure the voipcheap application is not lurking still registered
>> on the task bar but hidden.
>>
>> My guess is the first point though.
>>
>> is it voipcheap.com ? if so, then the incomining number would
>> presumably be an 056 number which shows in the control panell when you
>> log in to your account.
>>[/color]
> The ATA is set not to make calls unless registered and the web interface
> says that it it registered.
> As I don't use windoze I can safely say that their app is not running<g>.
> Yes, my incoming number is shown when I log into my voipcheap.co.uk account.[/color]

I not really sure what I'm talking about but... if you are behind a NAT
router are you forwarding the VOIP port (5060).