On Sat, 22 Mar 2008 16:12:47 +0000, Herman wrote:
[color=blue]
> "alexd" <troffasky@hotmail.com> wrote in message
> news:47e4e3fe$0$627$bed64819@news.gradwell.net...[/color]
[color=blue][color=green]
>> Mine's in bridged mode, and I can still access it by it's IP address.
>> You have to have an interface in the same subnet as the Bebox - ie my
>> BeBox is 192.168.1.254 and my PC is 192.168.1.3.[/color][/color]
[color=blue]
> Tried all that. There are two IP addresses I have configured for using
> on LAN ports. Configured static IP on the client PC in the same subnet,
> with each address to try to access it but to no avail. I have pasted
> the ip.ini section of the bridge1.tpl in case that sheds any light...[/color]

I'm just using the standard multi-IP 3 ports config, and I've customised
it by enabling SNMP and the fourth port.

In other news, I've given up trying to get the built-in ATA to register
with the Asterisk box plugged into its LAN. However your post has
reminded that me it also has a 10.0.0.0/24 address so maybe I'll give
that a shot. It would be handy to use the ATA on the Bebox and put my
standalone ATA to better use.

--
<http://ale.cx/> (AIM:troffasky) (UnSoEsNpEaTm@ale.cx)
18:22:59 up 27 days, 2:15, 2 users, load average: 0.01, 0.07, 0.07
Convergence, n: The act of using separate DSL circuits for voice and data