On Mar 19, 10:09 am, "Flyer" <m...@privacy.net> wrote:[color=blue]
> "Adam Aglionby" <ledli...@gmail.com> wrote in message
>
> news:f15f9ad2-69ec-4a9f-8d92-f9fe82485280@d21g2000prf.googlegroups.com...
>[color=green]
> > "Can't connect to login server" problem with PAP2 connected to Dlink
> > DL624 router attempting to connect to Voiptalk.[/color]
>[color=green]
> > My networking knowledge is very limited.[/color]
>[color=green]
> > Have assigned Pap2 a static IP and put that IP in the routers DMZ.[/color]
>[color=green]
> > Followed the Voiptalk setup about entering user and pass but get the
> > feeling am misssing out entering settngs in main system page.[/color]
>[color=green]
> > Gateway,netmask, primary dns dont have entries which kind of suspect
> > they should....[/color]
>[color=green]
> > Any advice gratefully received.[/color]
>
> Do as Roger suggests, and if it still doesn't work, try the following
>
> Logi into PAP2, go into Admin settings, advanced view
>
> On SIP page, near bottom, set Subst via Addr toYes
> in EXT IP put the external (ie Internet) IP from your router.
>
> That will hopefully avoid a NAT Traversal problem had with the PAP2 &
> Draytel.
> You'll need to change the EXT IP address if your router ever shows the
> external IP address has changed, otherwise it might not work ;-)
>
> P.[/color]

Thanks for the help guys!

Tracked down by another pair of eyes , not a setting on Pap, but on
router had tried to put the PAP on a DMZ address outside the range of
the rest of addresses the router was dishing out , oops, included PAP2
in address range and the lines came up, phew.

No doubt be back withj more questions on sipswitch,

Thanks again :-)
Adam