"Tim.." <the.farm.no@spam.btinternet.com> wrote in message
news:0sGdnS56uMSGfljanZ2dnUVZ8sCknZ2d@bt.com...[color=blue]
> Hi all.
>
> I am struggling in the dark somewhat with my 3102. (has been returned to
> factory settings, and firmware 5.1)
>
> My set up is Netgear DG834 > Switch - SPA 3102.
> - PC's
> - network
> printers etc.
>
> I do not use the LAN port on the 3102. (perhaps i should?)
>
> The DG834 assigns does not assign any DHCP IP's- they are all set
> manually.
>
> The SPA3102 is at 192.168.0.21 (or was)
>
> I had managed to enter my voipcheap info correctly but it could not
> register, thus was defaulted to the PSTN line.
>
> I then played with the WAN DHCP mode, which can have NAT / Bridge / Auto
> as I think the 3102 should be passive so set it to Bridge..
>
> This resulted in the voip line springing into action, but now i cant reach
> the 3102 on its login IP.
>
> HELP!!!
>
> Also, how / where do you choose which line you dial on when you pick up
> the phone.
>
> Much help appreciated!
>
> Tim..[/color]
I don't use them myself so would be unfair to wade in but this helpful chap
has written a simple guide.
[url]http://www.jmgtechnology.com.au/spa_3102_guide.pdf[/url]
Have a look and see where you have gone wrong.

IP scanner is good for finding what an IP has living there.

Al