"bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
news:6OUvj.79417$LD6.55108@fe3.news.blueyonder.co.uk...[color=blue]
> Ivor Jones wrote:[color=green]
>> "bob garbutt" <bobgarb@blueyonder.co.uk> wrote in message
>> news:vBSvj.7518$jH4.2063@fe1.news.blueyonder.co.uk : : Hi there,
>> : : : : Anyone using a Fritzbox on here?
>> : : : : Bob
>>
>> Yes, plenty of us. Which model and what's the question about it..?
>>
>> Ivor
>>[/color]
> hi, Ivor
>
> I have the fone ata with two separate lines, I think it the 1020 model, I
> updates to the latest firmware the other evening, because the volume on
> the device was a little low, it seemed to improve that and allowed extra
> option, but caused a problem when I called a mate who as a sipura device
> and is also on Sipgate, it keeped causing his device to re-set every time
> the phone rang at his end of the call, I was also wondering out to set the
> device to all me to reduce allow for local calls, a example would be
> instead of dialing 02082874189 I could just dial a local number, I'm used
> to dial plans on the sipura device.
>
> I notice they have forum, but no English ones!
>
> Cheers, Bob[/color]

Suspect his problem is his router or other device on his network. I had a
BT Voyager once that locked up occasionally when SIP traffic passed through.
Alternatively he may need to open some ports on his router, or the Sipura
may have some settings that need adjusting (no experience of these
unfortunately)

Your volume issue may be caused by the regional settings in the Fritz. In
my 7050 I can change this in Settings > Telephony > Regional options. You
may find that this has reset as a result of your firmware upgrade.

To be honest, I found the firmware updates on my Fritz caused more problems
than they solved. For instance, 3 way calling no longer works for me.