On Thu, 10 Jan 2008 01:45:33 -0800, Alister wrote:
[color=blue]
> Unfortunately I cannot seem to open the ports on the BT router for more
> than one internal IP address as this router's web interface does not
> seem to give a direct method for opening ports.[/color]

Are you trying to allow your phones outbound access? You could try
disabling the firewall completely while you test it and see if that helps.
[color=blue]
> What you have to do is create an 'application' which has ports assigned
> to it, and then you can assign this application to an IP address on the
> internal network. Unfortunateley when I try to assign this application
> to more than one phone the GUI gives me an error saying I cannot apply
> this to more than one IP.[/color]

It sounds like you're trying to use the port-forwarding mechanism, which
isn't going to let you forward the same outside address:port to different
inside address:ports, unless you have multiple outside addresses [in
which case you could just give the phones outside IPs and be done with
it].

--
<http://ale.cx/> (AIM:troffasky) (UnSoEsNpEaTm@ale.cx)
13:53:29 up 5 days, 4:17, 2 users, load average: 1.53, 1.58, 1.55
2x Broadband/IT/Telecoms support positions in Newcastle city centre.
For more info call 0191 229 8870 and ask for Steve. No agencies.