SETUP FOR SIPGATE.CO.UK
===================

using the units IP address Telnet into the 10v

ENTER THE FOLLOWING:-


sip set reg_srv sipgate.co.uk

sip set domain sipgate.co.uk

sip set outbound_pxy sipgate.co.uk

sip set reg_mode 1

net set nat 0

net set dnsmode 1


++++++++++++++++++++++++++++++ LINE 1

sip set tel_num 1 (((SIPGATE REG NUMBER)))

sip set reg_id 1 (((SIPGATE REG NUMBER)))

sip set reg_pwd 1 (((SIPGATE REG PASSWORD)))

sip set tel_name 1 (((SIPGATE TEL NUMBER)))



++++++++++ IF LINE 2 IS TO BE USED ENTER +++

sip set tel_num 2 (((SIPGATE REG NUMBER)))

sip set reg_id 2 (((SIPGATE REG NUMBER)))

sip set reg_pwd 2 (((SIPGATE REG PASSWORD)))

sip set tel_name 2 (((SIPGATE TEL NUMBER)))


++++++++++ LOGOUT OF TELNET ++++++++++++++++++++++++++++++

Now open the web interface and follow the quick set-up at the first BT screen
(THIS WILL SAVE THE SETTINGS YOU HAVE JUST MADE)